DLS-54.4-15
15 AMP BATTERY CHARGER FOR 48VDC

INPUT VOLTAGE
108-132 VAC
INPUT FREQUENCY
50-60 Hz
OUTPUT VOLTAGE
54.4 VDC
OUTPUT AMPERAGE
15 Amps
DLS-54.4-15 Battery Charger
  DESCRIPTION
The DLS-54.4-15 Battery Charger from IOTA Engineering converts nominal 108-132 AC voltage to 54.4 DC voltage for 48V battery charging.

As a battery charger, the unit will maintain the battery, delivering its full-rated current when the battery capacity falls sufficiently low. The voltage is set to deliver its maximum current for the necessary period of time to minimize undue stress to the battery caused by heating of its cells. This helps to ensure the longest possible life of the battery. Over time, as the battery nears its full capacity, the DLS-54.4-15 will automatically drop the current, providing a float-charge to the battery to prevent self-discharge of the cells.

  MODELS
DLS-54.4-15 Battery Charger DLS-54.4-15
The DLS-54.4-15 provides AC/DC conversion up to 15 amps and features a Dual Voltage Jack, allowing the user to manually select between a nominal charging voltage of 54.4V or a stepped-up charging voltage for faster battery charging.

DLS-54.4-15/IQ4
The DLS-54.4-15/IQ4 features an internal IQ Smart Charge Controller which automatically provides three-stage battery charging for safer charging and longer life for your system's battery.


  SPECIFICATIONS
DC Output Voltage (No Load) approx. 54.4V (DC)
Output Voltage Tolerance (No Load) + or - .5%
Output Amperage, Max Continuous 15 Amps
Output Voltage (Full Load) approx. >54V (DC)
Maximum Power Output, Continuous 800 Watts
Ripple and Noise <50 mV rms
Input Voltage Range 108-132V (AC)
Input Voltage Frequency 47-63
Maximum AC Current @ 108VAC 14 Amps
Typical Efficiency >80%
Max Inrush Current, Single Cycle 50 Amps
Short Circuit Protection Yes
Overload Protection >100%
Line Regulation 100 mV rms
Load Regulation <1%
Fan Control Proportional
Thermal Protection YES
Working Temperature Range 0-40C
Storage Temperature -20 to 80C
Withstand Voltage 1240V @ leads
Dimensions 13" x 6.5" x 3.4"
Weight 7.8 lbs





Back to IOTA Engineering Home Page