|
|
| LUMEN OUTPUT |
| (1) Lamp - 650 lumens |
| LAMPS OPERATED |
| 5, 7, 9, and 13W twin tube and 9-13W quad tube fluorescent lamps with integral starter |
| EMERGENCY OPERATION |
|
90 Minutes |
| PRODUCT DESCRIPTION |
|
The I-13-EM-A Fluorescent Emergency Ballast allows the same fixture to be used for both normal and emergency operation. In the event of a power failure, the I-13-EM-A switches to the emergency
mode and operates one of the existing lamps for 90 minutes. The unit contains a battery, charger, and inverter circuit in a single can. The I-13-EM-A can be used with most 7, 9, & 13 watt 2-pin twin tube compact fluorescent lamps, with an initial output of up to 650 lumens
for one lamp. The I-13-EM-A is provided with 3/8" flex for wiring to the fixture or ballast compartment. The test switch, charge light, and unit battery connector are installed in a standard switch box, which is connected to the I-13-EM-A via 3/8" flex. The switch box is mounted in the ceiling adjacent to the fixture. The I-13-EM-A is designed to be mounted on the fixture or in the ceiling adjacent to the fixture, and is U.L. Listed for retrofit applications. |
|
||||
| AVERAGE LUMEN RATINGS | |
| Lamp | 1 Lamp |
| 7W PL CF 2-Pin | 350 |
| 9W PL CF 2-Pin | 500 |
| 13W PL CF 2-Pin | 650 |
| FEATURES | |
|
U.L. and C.U.L. Listed Will cold start and operate all specified lamps Long-life high-temperature recyclable Ni-Cad battery 90-minute emergency operation Dual voltage 120/277V, 60Hz 5-year warranty. See Warranty Page for details. Galvanized Steel Case Includes test switch/charge indicator accessory kit Meets or exceeds all National Electrical Code and Life Safety Code Emergency Lighting Requirements International Voltage and Damp Location Models available |
|
| DIMENSIONS |
|