LUMEN OUTPUT
(1) Lamp - 3000 lumens
(2) Lamps - 1500 lumens
LAMPS OPERATED
Most 32W to 42W 4-pin
compact fluorescent lamps
EMERGENCY OPERATION
90 Minutes

PRODUCT DESCRIPTION
The I-160-ACL Fluorescent Emergency Ballast Kit allows the fixture to be used for emergency operation only. In the event of a power failure, the I-160-ACL switches to the emergency mode and operates one or two of the existing lamps for 90 minutes. The unit consists of an open circuit board assembly and battery pack that is designed for integral installation within the fixture. The unit can be used with most 32W and 42W 4-pin lamps, with an initial output of up to 3000 lumens for one or two lamps. The I-160-ACL is U.L. Component Recognized for factory installation only. It should not be field-installed.



TECHNICAL SPECIFICATIONS
Input Voltage

Input Wattage

Lamps Operated


Emergency Operation

Initial Illumination


Operating Temp

UL Conditions of Acceptability

120/277V 60Hz

4.5 Watts

Most 32W and 42W 4-pin
compact fluorescent lamps

90 Minutes

(1) lamp 3000 lumens
(2) Lamps 1500 lumens each lamp

0 to 55 degrees C

Must be factory wired



FEATURES
U.L. Recognized Component

Will cold start and operate all specified lamps

Long-life high-temperature recyclable Ni-Cad battery

90-minute emergency operation

Dual voltage 120/277V, 60Hz

5-year warranty. See Warranty Page for details.

Includes test switch/charge indicator accessory kit

Meets or exceeds all National Electrical Code and Life Safety Code
Emergency Lighting Requirements

International Voltage Models available



DIMENSIONS
CIRCUIT BOARD ASSEMBLY

Length
Width
Height
Weight

BATTERY PACK

Length
Width
Height
Weight



7 in.
2.65 in.
1.154 in.
.9 lbs



7 in.
2.56 in.
2.56 in.
3.25 lb.