| The I-232 is designed to operate two fluorescent lamps in parallel, insuring emergency light output from one lamp even if the other lamp is burnt out or otherwise inoperable. In the case of only one lamp operating, the I-232 will provide more power to the single lamp for additional lumen output. | |
|
|
|
| LUMEN OUTPUT | |
|
(2) lamps - 1400 lumens (700 lumens per lamp) |
|
| LAMPS OPERATED | |
| Most 2'-4' single, bipin T8 & T12, long compact, HO or VHO fluorescent lamps | |
| EMERGENCY OPERATION | |
|
90 Minutes |
|
| PRODUCT DESCRIPTION |
|
The I-232 Fluorescent Emergency Ballast allows the same fixture to be used for both normal and emergency operation. In the event of a power failure, the I-232 switches to the emergency
mode and operates two of the existing lamps in parallel for 90 minutes. The unit contains a battery, charger, and inverter circuit in a single can. The I-232 can be mounted in the wireway or on top of the fixture, and is UL Listed for retrofit
applications. The I-232 can be used with most 2'-4' lamps, with an initial output of up to 1400 lumens for two lamps (700 lumens each lamp). The I-232 is compatible with all electronic or magnetic, series or parallel output, multi-lamp ballasts.
|
|
||||
| AVERAGE LUMEN RATINGS | |
| Lamp | 2 Lamps |
| F17 T8 | 1000 |
| F32 T8 | 1400 |
| F20 T12 | 900 |
| F40 T12 | 1200 |
| FEATURES | |
|
U.L. and C.U.L. Listed Long-life high-temperature recyclable Ni-Cad battery Time Delay Enhancement Open Circuit Isolation Galvanized steel case 90-minute emergency operation For use with any magnetic or electronic ballast Includes test switch/charge indicator accessory kit DL model suitable for use in enclosed and gasketed fixtures Dual voltage 120/277V, 60Hz 5-year warranty. See Warranty Page for details. Meets or exceeds all National Electrical Code and Life Safety Code Emergency Lighting Requirements Damp Location and International Voltage Models Available |
|
| DIMENSIONS |
|