(Two 10W-18W Lamps) - 325 lumens
(Twin, Triple, Quad Tube, 2D and Straight)
and 18W-36W Long Compact Lamps
|
|
| LUMEN OUTPUT |
|
(One 10W-42W Lamp) - 650 lumens (Two 10W-18W Lamps) - 325 lumens |
| LAMPS OPERATED |
|
10W-42W 4-Pin Rapid Start Compact Lamps (Twin, Triple, Quad Tube, 2D and Straight) and 18W-36W Long Compact Lamps |
| EMERGENCY OPERATION |
|
90 Minute AC Output |
| PRODUCT DESCRIPTION |
|
The I-42-EM-TM Fluorescent Emergency Ballast allows the same fixture to be used for both normal and emergency operation. In the event of a power failure, the I-42-EM-TM switches to the emergency
mode and operates one or two of the existing lamps for 90 minutes. The unit contains a battery, charger, and inverter circuit in a single can. The I-42-EM-TM can be used with most 10W-42W, 4-pin, quad and triple tube compact fluorescent lamps and 18W-36W long compacts, with an initial output of up to 650 lumens
for one or two lamps. The I-42-EM-TM utilizes AC output to ensure compatibility with new lamp technologies, and features lamp selector leads for optimizing light output for designated lamp types. The I-42-EM-TM is designed to be mounted on top of the junction box or wireway, and is U.L. Listed for factory installation or retrofit applications. |
|
||||
| AVERAGE LUMEN RATINGS | ||
| Lamp | 1 Lamp | 2 Lamps |
| 13W PL CF | 350 | 400 |
| 18W PL CF QUAD | 350 | 550 |
| 26W PL CF QUAD | 425 | |
| 32W PL CF QUAD 4-PIN | 600 | |
| 42W PL CF QUAD 4-PIN | 750 | |
| F282 D/42 | 475 | 500 |
| F382 D/42 | 500 | 650 |
| 18W Long Compact | 500 | |
| 24W Long Compact | 575 | |
| 36W Long Compact | 650 | |
| FEATURES | |
|
U.L. and C.U.L. Listed Will cold start and operate all specified lamps Long-life high-temperature recyclable Ni-Cad battery 90-minute emergency operation Dual voltage 120/277V, 60Hz AC output in the emergency mode Time Delay Enhancement Open Circuit Isolation 5-year warranty. See Warranty Page for details. Galvanized Steel Case Includes one-piece TBTS test switch and charge indicator Selectable lamp leads for optimizing light output for desired lamp type Meets or exceeds all National Electrical Code and Life Safety Code Emergency Lighting Requirements International Voltage and Damp Location Models available |
|
| DIMENSIONS |
|