LUMEN OUTPUT
(1) Lamp - 825 lumens
LAMPS OPERATED
Most 2'-4' T5 or T8 linear lamps including
HO and 36-55W 4-Pin long compact lamps
EMERGENCY OPERATION
90 Minutes

PRODUCT DESCRIPTION
The ISL-54 Fluorescent Emergency Ballast allows the same fixture to be used for both normal and emergency operation. In the event of a power failure, the ISL-54 switches to the emergency mode and operates one of the existing lamps for 90 minutes. The ISL-54 delivers high performance in a slim design. This unit is ideal for use in linear lighting fixtures where ballast compartment space is limited. The unit contains a battery, charger, and inverter circuit in a single can. The ISL-54 is UL Listed for retrofit applications and can be used with most 2'-4' T5 and T8 fluorescent lamps, including HO and 36-55 Watt 4-pin long compact, at an initial output of up to 825 lumens for one lamp.



TECHNICAL SPECIFICATIONS
Input Voltage

Input Wattage

Lamps Operated



Emergency Operation

Initial Illumination

Operating Temp

Approval

Weight

120/277V 60Hz

2.5 Watts

Most 2'-4' T5 or T8 linear lamps
including HO and 36-55W 4-Pin
long compact lamps

90 Minutes

(1) Lamp 825 lumens

0 to 55 degrees C

UL and CUL Listed

2.4 lbs

AVERAGE LUMEN RATINGS
Lamp 1 Lamp
14W T5 450
21W T5 Pentron (FP21) 500
24W T5 450
28W T5 Pentron (FP28) 800
39W T5 700
54W T5 825
F17 T8 650
F25 T8 650
F32 T8 700
F40 T8 600
36W Long Compact 675
40W Long Compact 675
50W Long Compact 650
55W Long Compact 650


FEATURES
U.L. and C.U.L. Listed

Will cold start and operate all specified lamps

Long-life high-temperature recyclable Ni-Cad battery

90-minute emergency operation

Dual voltage 120/277V, 60Hz

Time Delay Enhancement

Open Circuit Isolation

5-year warranty. See Warranty Page for details.

Slim design fits in smaller ballast compartments

Includes test switch/charge indicator accessory kit

Meets or exceeds all National Electrical Code and Life Safety Code
Emergency Lighting Requirements

International Voltage and Damp Location Models available


DIMENSIONS





Back to IOTA Engineering Home Page