(Universal) 120-277Vac, 50/60Hz
2.9 Watts (max)
10-60 Vdc Class 2 Compliant
0.8A (@10Vdc) - 0.13A (@60Vdc)
8 Watts (constant)
Max. AC Driver Output Current
≥ 0.9 at 120VAC**
Meets ANSI/IEEE C62.41.2-2002
0° to 55° C
< 15% (@ full charge)
Complies to FCC commercial limits
High Temp Nickel-Cadmium
24 Hour Recharge
7-10 Year Life Expectancy
cUL Listed for factory and field installation
CA T20 Appliance Efficiency Database
*Max. output voltage in emergency mode is 58.5 Vdc with a + tolerance of 1.5 volts.
**PF ≥ 0.75 at 277Vac.
- High Efficiency Performance meets CA T20 battery charger efficiency standards
- UL Listed for factory and field installation
- Constant Power Design maintains emergency illumination through 90-minute runtime with no light degradation
- Slim Profile housing allows integral installation within restrictive and narrow channel spaces of strip and troffer fixtures
- Two-wire universal AC input
- Self-sensing output voltage operates various product types, reducing product SKUs for emergency options
- UL 924 Listed for U.S. and Canada
- UL 1310 Certified, Output Class 2 Compliant
- Long life high temperature recyclable Ni-Cad battery
- Galvanized steel case
- Includes single-piece TBTS test switch and charge indicator accessory kit
- For use with switched and unswitched fixtures
- 5-year warranty. See Warranty Page for details.
- Meets or exceeds all NEC, IBC, and Life Safety Code Emergency Lighting Requirements
- Rated or use in Plenum, Damp Location, Recessed Type IC, and Enclosed and Gasketed Fixtures
- RoHS Compliant
- Patented. Visit www.iotaengineering.com/patents for more details.
Emergency Lumen Performance - ILB-SL-CP08-HE
|Approx. Luminaire Efficacy||Minute 1||Minute 45||Minute 90|
The AC input shall be a two-wire, universal voltage capable 120 thru 277 VAC, 50/60 Hz and be UL Listed to Category Control Number (CCN) FTBR, Emergency Lighting and Power Equipment, and FTBV, Emergency Light-Emitting-Diode Drivers for field installation. Maximum input power of the emergency driver shall be 2.9 watts. The unit shall monitor and adjust the input power consumption and be certified in the CA Title 20 Modernized Appliance Efficiency Database System (MAEDBS) as a small battery charger.
The unit charger shall consist of a two-stage charging system which samples the battery in relation to its temperature, state of charge and input voltage fluctuations. The charger shall be current limited, temperature compensated, short-circuit protected with reverse polarity protection. A low voltage battery disconnect (LVD) circuit shall be provided and will disconnect the load and circuitry from the battery when it reaches approximately 80 to 85% of its nominal terminal voltage, preventing a non-recoverable, deep-discharge condition as well as equipment initialization failure when utility power is restored. The unit shall achieve a full recharge in 24-hours.
The emergency driver shall accommodate an LED load with a forward voltage requirement ranging from 10 to 60 VDC. The output voltage sensing shall be automatic and instantaneous with a resulting, inversely-proportional current to maintain constant power to the LED array with an output tolerance of +/- 3%. The unit shall supply the rated load for a minimum of 1 1/2 hours or to 87 1/2% of rated battery terminal voltage. The output power to the LED load during emergency operation shall be held constant 8 watts from minute one throughout the entire emergency run time resulting in no loss or degradation of the light source during emergency operation.
The unit shall be furnished with an electronic, AC-lockout circuit which will connect the battery when the AC circuit is activated, and an electronic brownout circuit which will enable a transfer to emergency operation when utility power dips below an acceptable level. Maximum remote mounting distance of the emergency driver shall be 50-feet.
Mounting Center: 21.77" x 0.67"