www.iotaengineering.com
IOTA Home Page IOTA Power Products Distributors IOTA Contacts Search the IOTA website
Follow us on Linkedin! Watch IOTA videos on YouTube! Visit us on Facebook! Follow us on Twitter! Read the Latest IOTA News! Get the latest IOTA info delivered to your e-mail
IOTA Power Products IOTA Power Product Applications IOTA Technical Library What's New in IOTA Power Products
   DLS-45 CONVERTER / CHARGER Specification Sheet in PDF format Installation Manual in PDF format Warranty Information
DLS-45 Battery Charger and Power Converter
  INPUT VOLTAGE
  108-132 VAC

  INPUT FREQUENCY
  50-60 Hz

  OUTPUT VOLTAGE
  13.4 VDC

  OUTPUT AMPERAGE
  45 Amps
UL Listed for US and Canada

The DLS-45 Power Converter/Battery Charger from IOTA Engineering converts nominal 108-132 AC voltage to 13.4 DC voltage for both DC load operation and 12V battery charging.

As a power supply, the unit's tightly controlled regulation allows the user to operate a nominal 12VDC load up to 45 amps.

As a battery charger, the unit will maintain the battery, delivering its full-rated current when the battery capacity falls sufficiently low. The voltage is set to deliver its maximum current for the necessary period of time to minimize undue stress to the battery caused by heating of its cells. This helps to ensure the longest possible life of the battery. Over time, as the battery nears its full capacity, the DLS-45 will automatically drop the current, providing a float-charge to the battery to prevent self-discharge of the cells.




Model Features DLS-45
The DLS-45 provides AC/DC conversion up to 45 amps and features a Dual Voltage Jack, allowing the user to manually select between 13.6V and 14.2V charging.


DLS-45/IQ4
The DLS-45/IQ4 features an internal IQ4 Smart Charge Controller which automatically provides four-stage battery charging for safer charging and longer life for your system's battery.





  • Switch-mode technology


  • Exceptionally clean DC output


  • Tight line-load regulation


  • Quickly and efficiently charges batteries


  • Designed to withstand low transient AC line voltage


  • Current limit and thermal/overload protection


  • Lower operating temperature


  • Quiet fan operation


  • External reverse polarity fuse protection from incorrect battery connection


  • High and normal-stage charging jack


  • Compatible with the IOTA IQ4 Charge Controller


  • UL and CUL listed
  SPECIFICATIONS
DC Output Voltage (No Load) approx. 13.6V (DC)
Output Voltage Tolerance (No Load) + or - .7%
Output Amperage, Max Continuous 45 Amps
Output Voltage (Full Load) approx. >13.4V (DC)
Maximum Power Output, Continuous 600 Watts
Ripple and Noise <50 mV rms
Input Voltage Range 108-132V (AC)
Input Voltage Frequency 47-63
Maximum AC Current @ 108VAC 11 Amps
Typical Efficiency >80%
Max Inrush Current, Single Cycle 30 Amps
Short Circuit Protection Yes
Overload Protection >100%
Line Regulation 100 mV rms
Load Regulation <1.5%
Fan Control Proportional
Thermal Protection YES
Working Temperature Range 0- 40C
Storage Temperature -20 to 80C
Withstand Voltage (VDC)* 1700/1700/500
Dimensions 9.7" x 6.7" x 3.4"
Weight 5.0 lbs

*Primary to Chassis/Primary to Secondary/Secondary to Chassis

Detailed mounting footprint is available in the Technical Library


IOTA Home Page | IOTA Distributors | Contact Us | IOTA Converters/Chargers | IOTA IQ4 Smart Charge Controller | Technical Library | What's New
DLS-45 Print Version Spec Sheet | DLS Instruction Manual | IOTA Power Products Warranty