The DLS-75 Power Converter/Battery Charger from IOTA Engineering converts nominal 108-132 AC voltage to 13.4 DC voltage for both DC load operation and 12V battery charging.
As a power supply, the unit's
tightly controlled regulation allows the user to operate a nominal 12VDC load up to 75 amps.
As a battery charger, the unit will maintain the battery, delivering its full-rated current when the battery capacity falls sufficiently low.
The voltage is set to deliver its maximum current for the necessary period of time to minimize undue stress to the battery caused by heating of its cells. This helps to ensure the longest possible life of the battery. Over time, as the battery
nears its full capacity, the DLS-75 will automatically drop the current, providing a float-charge to the battery to prevent self-discharge of the cells.
The DLS-75 provides AC/DC conversion up to 75 amps and features a Dual Voltage Jack, allowing the user to manually select between 13.6V and 14.2V charging.
The DLS-75/IQ4 features an internal IQ4 Smart Charge Controller which automatically provides four-stage battery charging for safer charging and longer life for your system's battery.
Exceptionally clean DC output
Tight line-load regulation
Quickly and efficiently charges batteries
Designed to withstand low transient AC line voltage
Current limit and thermal/overload protection
Lower operating temperature
Quiet fan operation
External reverse polarity fuse protection from incorrect battery connection