top banner
   IIS-125-CG UNIT INVERTER Specification Sheet in PDF format Installation Manual in PDF format Wiring Diagrams
IOTA IIS-125-CG Inverter Emergency Output
125 Watts (.9 to .9 Power Factor)

Lamps Operated

Emergency Operation
90 Minutes

Product Description

The IOTA IIS-125-CG is a UL Listed stand-alone modified sine wave output inverter designed to provide power to designated emergency lighting fixtures. In a power loss situation, the IOTA IIS-125-CG will supply 125W of power from the onboard battery supply. The IOTA IIS-125-CG works in conjunction with fluorescent, incandescent, and LED lighting loads and will automatically run switched, normally-on, or normally-off designated emergency fixtures. The IIS-125-CG is ideal for applications requiring an emergency source for lighting arrangements that utilize multiple lamp and fixture types. The IIS-125-CG is designed for mounting in the ceiling grid and comes with a three-year warranty and seven-year pro-rata battery warranty. Not for use in air supply/air return ceilings.

Product Specifications


Dual (120/277, 60Hz)
155 Watts (Bulk Charge)

120/277VAC, 60Hz
125W at 0.9 leading to 0.9 lagging PF

Transfer Time Less than 50 milliseconds

Voltage Regulation on Emergency +/- 10%

Frequency Regulation on Emergency +/- 3%

Load Power Factor Range 0.9 leading to 0.9 lagging PF

Operating Temp
20� to 30� C
(68� to 86� F)

42.5 lbs


UL 924 Listed
  • Emergency lighting supplied from one convenient source

  • Operates LED, fluorescent lamp and ballast combinations (including two-wire dimming ballasts), and incandescent lamp types

  • Grid ceiling mounting design

  • Includes momentary contact test switch, yellow ready indicator, green inverter-on indicator, and red charging indicator

  • Replaceable output fuse protection

  • 12-Volt Valve Regulated Lead Acid (VRLA) battery provides long life and is maintenance-free

  • Line voltage allows for remote mounting of emergency fixtures at distances up to 1000 feet

  • Low Battery Voltage Disconnect

  • Line Latch Protection

  • Allows for operation of switched fixtures

  • Dimming Relay option for dimming control applications

  • 18-gauge steel cabinet design

  • 3/7 Pro-Rata Warranty. See Warranty Page for details.

  • Meets or exceeds all National Electrical Code and Life Safety Code Emergency Lighting Requirements

  • IIS-125-CG

  • IIS-125-CG-DR (Dimming Relay Option)
    Dimming Relay leads allow for a dimming signal to operate the luminaires in the desired, dimmed state during normal operation and then bypass the dimming control to operate the fixtures at full light output in the emergency mode. Additionally, if desired, the dimming leads can be wired to operate the luminaires at a reduced lumen output setting during emergency operation based on the dimmable driver(s) being used. Refer to the installation manual for details.


IOTA Links

Home Page

LED Emergency Drivers

IIS Series Inverters

Fluorescent Emergency Ballasts

Exit Signs and Emergency Fixtures

Emergency Controls and Accessories

What's New

Product Links

IIS Inverter Product Guide

IIS Mini Inverters

IIS Micro Inverters

Inverter Technical Library

Contact IOTA

IOTA Directory

Request Literature

Find Your Local IOTA Sales Representative

Technical Services Page

T: 1-800-866-4682  •  F: (520) 741-2837  •  PO Box 11846 Tucson, AZ  •  1361 E. Wieding Road Tucson, AZ 85706

© 2018 IOTA Engineering, L.L.C. All Rights Reserved.   Privacy Policy   Contact Us